Want  a Level kit but want to do it right all at one?  We put this kit together using parts that are proven to work well together and will make a complete kit all at once with no short cuts.

Starting with a Bilstein 6112 front level kit which is adjustable from .7 to 3" of lift.  Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift. These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities.

Next we pair the front level kit with Bilstein B8 upper control arms.  The kit contains a pair of control arms which correct the caster alignment for better straight line stability with lifted suspensions, and the improved pivot angles increase wheel travel and reduce stress on the joints. These strong black powder-coated 4130 chromoly steel arms are a tubular design which allows for more spring and shock clearance and feature greasable polyurethane bushings and heavy duty ball joints for the ideal combination of ride quality and durability with minimal maintenance needed.

In the rear we start with a pair of Bilstein 5160 remote reservoir shocks. Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation.

For a 2" lift to back we use the Bilstein B12 rear lift springs.  The 2" rear lift paired with the front at its 3" height setting allows room for larger tires front and rear as well as increased suspension travel.  These springs are also a great match to the front springs in the 6112.

Finish it off with a pair of heavy Duty SPC rear lower control arms.  This pair of rear lower control arms are direct replacements for weak or bent factory units. Made of 3/16” wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of road noise and xAxis™ sealed flex joints in the other end for superior flexibility off road. 

Works great with 33" or 285/70r17 tires .

Does not fit TRD Pro, Limited or Nightshade models

This Part Fits: